Friday, January 26, 2018

How configure WiFi in recalbox?

To configure WiFi in recalbox just follow these steps:
    Trucos Recalbox
  1. Start your raspberry pi recalbox with a keyboard connected to your raspberry pi.
  2. Press Enter to access to menu.
  3. Move cursor keys until you select Network configuration and then press A key.
  4. Move cursor keys until you select SSID Wifi and then press A key.
  5. Use the cursor keys to focus over text area, then press A key, write your SSID name, press Enter, move cursor keys until you select OK and then press A key.
  6. Move cursor keys until you select Wifi password and  then press A key.
  7. Use the cursor keys to focus over text area, then press A key, write your Wifi password, press Enter, move cursor keys until you select OK and then press A key.
  8. Move cursor keys until you select Activate Wifi and change to ON use the A key.
  9. Move cursor keys until you select Return and  then press A key.
  10. Wait for a seconds and you'll see a dialog box than shows "Activated WiFi". You can close this dialog with A key. 
Your raspberry pi might be connected to wifi.

Problems?

If your raspberry still isn't connect, may be in one of these cases:
  • Remember than SSID name and wifi password are case sensitive.
  • If you use strange caracters in SSID name or wifi password then use wire connection and access to share network resource.
    Search the file system/recalbox.conf and edit wifi values.
  • Use channels allowed in France or recalbox doesn't see your wifi network (example: in Spain channel 12 is allowed but not in France, this selection won't work).
    The solution is change wifi channel in your router.

Source

No comments:

Post a Comment